WorkFit-S, Dual Workstation with Worksurface

• Bestselling design
  Our most stable, ergonomic solution

• Front surface-mount
  Fits desks flush against walls or shallow surfaces

• Double productivity
  Supports two monitors
  up to 24″

• Smooth adjustment
  Full workstation moves easily up and down

• Keyboard tray
  Ergonomic, drop-down position with back-tilt feature

• Personalized views
  Rotate screens 360° to match your workflow

Screen

Capacity

Lift

Tilt

Pan

Rotation

Vesa

Warranty

• Part Number: 33-349-200, 33-349-211
• Description: WorkFit-S Sit-Stand Workstation for Dual Displays, with Worksurface and Large Keyboard Tray
• Includes height-adjustment column, desk clamp, crossbar, two (2) LCD pivots, worksurface, large keyboard tray
• NOTE: Extra-long cables may be required to span between standing and sitting heights
• * Maximum outside width of display is 24.5″ (62 cm) when display is 2″ (5 cm) thick. Accommodates most displays with screen-size up to 24″ as well as some displays with screens as large as 26″. Actual allowable width of displays will vary slightly depending on display thickness. Note that older versions of this product used a narrower crossbar, which accommodated monitors with screens up to 22″
• † Weight Capacity: Maximum total load on height-adjustment assembly = 25 lbs (11.4 kg). LCD weight = 6–12 lbs (2.7–5.5 kg) each, worksurface ≤ 5 lbs (2.3 kg), keyboard tray ≤ 5 lbs (2.3 kg). For proper operation the total weight of components when added together should not exceed 25 lbs (11.4 kg)
• ‡ Lift Range: LCD and keyboard adjust 18″ (46 cm) in tandem; LCD adjusts 4.8″ (12.2 cm) independently; maximum LCD height adjustment = 22.8″ (58 cm). The worksurface restricts the vertical travel range of the LCD lift pivot; height adjustment of LCD without worksurface is 5″ (13 cm)
• Install displays at 3° or 8° upward angle for optimized viewing conditions

• Desk Clamp attaches to surface edge .47″ to 2.4″ (1.2 to 6 cm) thick
• NOTE: Because mounting surface materials can vary widely, it is imperative that you make sure mounting surface is strong enough to handle mounted product and equipment
• Ergonomic back-tilt keyboard tray ensures wrists remain in a neutral position during data entry—avoid repetitive-stress injuries while increasing comfort and productivity
• Keyboard tray can be installed in nine potential locations relative to the monitor: centered or off-set to left or right; at standard focal distance or 2.2″ (5.6 cm) or 4.4″ (11.2 cm) farther away
• Worksurface Dimensions: 0.25″H x 23″W x 15″D (6 x 585 x 380 mm)
• Keyboard Tray Dimensions: 0.25″H x 27″W x 9″D (6 x 685 x 226 mm)
• Durable, easy-to-clean exterior composed of aluminium, high-grade plastic and powder coated painted steel
• Mounting Standards: VESA FDMI MIS-D, 100/75, C (hole pattern: 100 x 100 mm & 75 x 75 mm)
• This product is certified in compliance with indoor air quality standards defined by ANSI/BIFMA pertaining to emissions of VOC (volatile organic compounds)
• Shipping Dimensions: 8″H x 23″W x 44″D (20 x 58 x 115 cm)
• Shipping Weight: 44 lbs (20 kg)
• Warranty: Five (5) years