Dual Monitor & Handle Kit

• Perfect dual-mounting solution for monitors with screen sizes of 17″ to 24″
• Attaches to wide variety of mounts using a 50 x 50 mm or 100 x 100 mm hole pattern

• Robust design ensures many years of service
• Conceal and organize cables: Display cables can be neatly routed behind displays

Screen

Capacity

Lift

Tilt

Pan

Rotation

Vesa

Warranty

Description: Dual Monitor & Handle Kit (black)

Includes bow, two mounting brackets, handle, mounting hardware

* Outside width of monitor should be 14″ to 24.5″ (35 to 62 cm). This range accommodates most 17″ to 24″ displays as well as some displays as large as 26″. If the outside width is less than 14″ (35 cm), a small gap will be present between the two displays. Displays with an outside width greater than 24.5″ (62 cm) are not compatible

† This kit adds an additional 6 lbs (2.7 kg) to your mounting solution. Your mounting solution’s weight capacity must be reduced by 6 lbs (2.7 kg) when using standard monitors less than or equal to 2.5″ (64 mm) thick. Additional reduction may be required if monitors are greater than 2.5″ (64 mm) thick. Exception: When used as a replacement bow on WorkFit Dual products, there is no reduction in capacity. Combined weight of displays can be no more than 36 lbs (16.4 kg)—in no circumstances should displays exceed this weight

Mounting Standards: VESA FDMI MIS-D, 100/75, C (hole pattern: 100 x 100 mm & 75 x 75 mm)

This kit can be installed and used without the included handle

Product Dimensions: 4″H x 29.1″W x 1.5″D (10 x 74 x 38 cm)

Shipping Dimensions: 31″ x 13.5″ x 7″ (79 x 34 x 17.5 cm)

Shipping Weight: 8.4 lbs (3.8 kg)

Warranty: Five years